WEG 01036ES1E215TC-W22 W22 Electric Motor – 10 HP, 230V, Single-Phase, 213/5TC, C-Face + Foot Mount
Product Overview
The WEG 01036ES1E215TC-W22 is a 10 HP W22 single-phase electric motor with a 213/5TC NEMA frame and c-face + foot mount configuration. It provides rotary power for equipment selected to match its electrical supply, operating speed and mechanical interface. This listing is for the complete manufacturer catalog number shown; motors with another suffix or mounting version should not be substituted without checking the differences.
This model belongs to the 2-pole speed family and is selected here for 230V, 60 Hz single-phase operation. Single-phase and three-phase motors are electrically different, even where horsepower and frame designations look similar. Confirm the supply and the exact connection diagram on the motor before installation. The listing does not treat nominal synchronous speed as the actual full-load RPM.
The C-face-and-foot arrangement combines a NEMA face mounting interface with base mounting feet. Verify the face register, bolt pattern, shaft extension and coupling requirements against the exact dimensional drawing. A NEMA C-face is not interchangeable with an IEC FF/D-flange merely because both have a circular front face.
Key Features
- WEG W22 model 01036ES1E215TC-W22 for exact catalog identification.
- 10 HP output rating for load selection.
- Single-phase operation; 230V supply configuration selected for this listing.
- 2-pole construction at 60 Hz.
- NEMA 213/5TC frame and c-face + foot mount arrangement.
- Cast-iron TEFC construction with external fan cooling.
Technical Specifications
| Manufacturer | WEG |
|---|---|
| Catalog number | 01036ES1E215TC-W22 |
| Power Plus supplier item | 5160302 |
| Series | W22 |
| Output | 10 HP |
| Listed supply configuration | 230V, single-phase, 60 Hz |
| Poles | 2 |
| NEMA frame | 213/5TC |
| Mounting | C-Face + Foot Mount |
| Enclosure | TEFC |
| Housing | Cast iron |
Applications
Evaluate the motor for commercial, maintenance or general-purpose driven equipment requiring this output rating and single-phase supply. Pumps, fans and other driven loads must be checked individually for starting torque, operating speed, duty and mechanical compatibility. A matching horsepower figure does not establish compatibility with a particular machine.
For a replacement, document the existing nameplate, shaft interface and installation dimensions. Compare the speed family and supply arrangement as well as horsepower. An incorrect voltage connection, incompatible mounting pattern or unsuitable starting load can prevent correct operation even when the motor physically fits the space.
Installation and Selection Notes
A qualified installer should confirm the required wiring arrangement, supply protection and grounding. Use the exact supplied motor's nameplate and connection diagram; alternate voltage ratings shown in other documentation require separate verification. This listing presents the 230V configuration and does not promise that every alternate voltage connection is available on every production revision.
Check starter and overload suitability for a single-phase motor, including the load's starting demands. Confirm any starting components or controls required by the manufacturer rather than assuming they match an existing installation. Do not connect the motor to a three-phase drive or other electronic control unless the equipment manufacturers explicitly support that arrangement.
Install the motor on an adequate mounting structure, align the shaft and driven equipment correctly, and provide the required ventilation around the fan and housing. Verify the load's duty requirements and environmental conditions with the manufacturer's documentation. Retain the exact catalog number when requesting a dimensional drawing or application review.
Shipping and Product Notes
Packaged dimensions, shipment weight and any freight requirements must be confirmed for the supplied unit. Net motor weight does not include packaging; estimated measurements should not be treated as exact carton data. Confirm what accessories are supplied before arranging the installation.
Image note: The image is an illustrative W22 motor-family render, not an exact-model photograph. Confirm shaft, mounting, terminal-box and starting-component arrangement with the manufacturer drawing before purchase.