WEG 00536ET3E184JM-W22 Close-Coupled Pump Motor, 5 HP, 208-230/460V, 3-Phase, 182/4JM
Product Overview
The WEG 00536ET3E184JM-W22 is a 5 HP, three-phase electric motor with a 182/4JM frame and cast iron housing. This listing is identified by Power Plus Retailers SKU 5160420. Its IC411 - TEFC enclosure and foot-mounted arrangement are important selection details alongside the electrical rating. The listed operating configuration is 208-230/460 V, 60 Hz.
This is a JM close-coupled pump motor. The shaft and pump-facing interface are intended for equipment designed around the specified JM frame, where the motor and pump connect as a compact assembly. Matching horsepower alone is insufficient: compare the pump manufacturer’s shaft, register, mounting and impeller attachment requirements with the complete motor drawing. A general-purpose T-frame motor is not automatically an interchangeable replacement.
The totally enclosed fan-cooled construction uses an external cooling arrangement around the motor housing. This configuration should be distinguished from the open-drip-proof versions in the pump-motor range. TEFC describes motor construction; it does not establish submersible service, hazardous-location approval or suitability for every installation environment.
Key Features
- 5 HP (3.7 kW) rated output for a correctly sized equipment drive.
- 182/4JM frame with foot mounting and a JM pump interface.
- Three-phase supply configuration: 208-230/460 V at 60 Hz.
- 2-pole design; confirm the delivered nameplate operating speed.
- Cast iron housing with IC411 - TEFC construction.
- Complete manufacturer catalog number provided for model-specific selection.
Technical Specifications
| Manufacturer | WEG |
|---|---|
| Manufacturer catalog number | 00536ET3E184JM-W22 |
| Retailer SKU | 5160420 |
| Product type | Close-Coupled Pump Motor |
| Housing | Cast iron |
| Phase | Three-phase |
| Mounting configuration | Foot-mounted, JM pump interface |
| Output | 5 HP (3.7 kW) |
| Frame | 182/4JM |
| Number of Poles | 2 |
| Frequency | 60 Hz |
| Rated voltage | 208-230/460 V |
| Enclosure | IC411 - TEFC |
| Insulation Class | F |
| Duty Cycle | Cont.(S1) |
Applications
For contractors, pump installers and maintenance teams selecting a replacement drive for a compatible close-coupled pump. Application suitability depends on the complete pump assembly, duty point, required operating speed and electrical supply. The motor alone does not determine flow, pressure, head or fluid compatibility, and this listing does not establish compatibility with a specific pump brand or model.
Installation and Selection Notes
Before ordering, compare the full catalog number, frame designation and electrical data with the existing motor and equipment documentation. Verify supply voltage, phase and frequency, shaft diameter and extension, mounting-hole locations, rotation requirements and available installation space. Confirm that the driven load can start and operate within the motor’s ratings.
This is a three-phase model and requires a suitable three-phase supply. Have a qualified installer verify the connection diagram for the selected voltage and size conductors, starters, disconnecting equipment and overload protection from the delivered nameplate data. Variable-frequency-drive suitability and operating limits require confirmation for the exact motor and application.
Retain adequate cooling airflow and follow manufacturer instructions for alignment, support and maintenance. Exact loaded RPM, full-load current and protection settings should be checked against current model documentation; they have not been inferred from horsepower or pole count in this listing.
What’s Included
This listing identifies the motor. A pump assembly, impeller, seal kit, control panel, coupling, pulley or installation hardware is not represented as included unless separately confirmed.
Shipping and Product Notes
Packaged weight and carton dimensions remain to be confirmed. Frame-family spreadsheet estimates are not presented as measured shipping data. Confirm delivery requirements before purchase. Product imagery is an AI-retouched illustration based on the model reference; technical labels are omitted and physical details may differ. Use manufacturer drawings to confirm mechanical dimensions.