WEG 00158ET3EAL90LFF-W22 IEC Electric Motor – 2 HP, 230/460V, 3-Phase, 90S/L, B35 Flange + Foot Mount

Product Overview

The WEG 00158ET3EAL90LFF-W22 is a 2 HP, three-phase IEC electric motor with a 90S/L frame and b35 flange + foot mount configuration. This listing identifies the exact manufacturer catalog number so an installer can compare the motor with the driven equipment, mounting interface and electrical supply before ordering. It is a aluminum-frame motor; select it by its complete electrical and mechanical requirements rather than horsepower alone.

This model uses 4-pole construction at 60 Hz. Pole count helps distinguish its speed family, but the actual rated running speed depends on the exact motor data. A synchronous speed calculation should not be used as a substitute for the manufacturer's full-load RPM. Confirm the required driven-equipment speed and any coupling or pulley arrangement before replacing another motor.

The flange-and-foot arrangement provides an IEC FF/D-flange interface together with mounting feet. Flange diameter, register, bolt-hole pattern and shaft dimensions must match the connected equipment; this is not a NEMA C-face listing. Different mounting versions and frame systems are not automatically interchangeable.

Key Features

• Exact WEG catalog number 00158ET3EAL90LFF-W22 for identification and technical review.
• 2 HP output rating and 4-pole construction.
• Three-phase supply, 230/460V at 60 Hz.
• Aluminum housing and IEC 90S/L frame designation.
• B35 Flange + Foot Mount; verify the manufacturer's dimensional drawing for the complete interface.
• TEFC construction with external fan cooling; maintain the required cooling clearance.

Technical Specifications

Applications and Selection

Evaluate this motor for commercial or industrial equipment designed around its IEC mounting interface and electrical rating. Potential driven loads must be checked individually for torque demand, starting load, operating speed and duty. A pump, fan, gearbox, conveyor or other machine is compatible only when its requirements match the exact motor configuration. No particular machine or pump compatibility is promised by this listing.

When selecting a replacement, record the existing motor catalog number, nameplate ratings, mounting dimensions and shaft measurements. Compare those details with the manufacturer documentation for this model. A matching horsepower rating or similar appearance does not establish that two motors can be substituted.

Installation Notes

A qualified installer should verify voltage, phase, frequency and the correct connection diagram before energizing the motor. Where more than one frequency or voltage appears in manufacturer documents, apply the ratings for the actual operating supply. Do not assume a rating at one frequency applies unchanged at another.

Confirm that the starter, overload protection, branch circuit and driven load are suitable. For variable-frequency-drive operation, verify the permitted operating range, cooling requirements and motor protection with WEG before selecting the drive settings. Installation should provide correct alignment, secure mounting, unobstructed ventilation and access for maintenance.

Shipping and Product Notes

Exact packaged dimensions and shipping weight require confirmation for the supplied unit. Freight or parcel service must be selected from verified packaged measurements. Net motor weight is different from packed shipment weight, and planning estimates should not be treated as exact carton data.

Image note: The image is an illustrative render. Confirm the exact mounting, shaft and physical configuration using the manufacturer's drawing before purchase. Included accessories must be confirmed for the supplied catalog item.