Pedrollo CP680C Centrifugal Water Pump 5.5HP 230/460V 3PH 2" NPT
The Pedrollo CP680C is a heavy-duty single-impeller centrifugal water pump designed for clean water applications where reliable flow and pressure are required. It is suitable for agricultural irrigation, industrial water supply, water transfer, pressure boosting, and other demanding water systems.
This 5.5 HP three-phase pump operates at 230/460V and 60Hz and can deliver up to approximately 158 GPM with a maximum head of about 171 ft, depending on the operating point. Its robust construction is designed for continuous-duty operation.
Key Technical Specifications
- Brand: Pedrollo
- Model: CP680C
- Pump Type: Single-Impeller Centrifugal Water Pump
- Power: 5.5 HP / 4 kW
- Voltage: 230/460V
- Frequency: 60Hz
- Phase: Three Phase
- Maximum Flow: 158 GPM
- Maximum Head: 171 ft
- Suction: 2" NPT
- Discharge: 2" NPT
- Pump Body: Cast Iron
- Impeller: Brass
- Motor Shaft: AISI 431 Stainless Steel
- Insulation: Class F
- Protection: IPX5
- Duty: Continuous S1
- Application: Clean Water
Ideal Applications
- Agricultural irrigation
- Industrial water supply
- Water transfer
- Pressure boosting
- Commercial water systems
- Clean water circulation
Important Information
The CP680C is designed for clean water free of abrasive particles and liquids that will not damage the pump components.
Actual flow and pressure depend on the installation and operating point. This listing is for the 230/460V three-phase version with 2" NPT connections.
Please verify the voltage and electrical requirements on the pump nameplate before installation. Professional installation is recommended.