Submersible Multi-Impeller Pump TOP MULTI 2 V.115/60HZ 10m Cable 0.75HP
The Pedrollo TOP MULTI 2 is a high-efficiency submersible multi-impeller pump designed to supply and transfer clean water for domestic, civil, and irrigation applications. Its multi-stage design helps provide increased pressure, making it suitable for use with water tanks, reservoirs, rainwater collection systems, and other water-supply applications.
This single-phase electric water pump operates at 115V / 60Hz and delivers 0.75 HP of power. The unit includes a 10 m power cable, providing convenient reach for different installation conditions. According to Pedrollo’s official TOP MULTI documentation, the series can reach up to 52 m of head, depending on the specific operating conditions and pump curve.
Key Technical Specifications
-
Brand: Pedrollo
-
Model: TOP MULTI 2
-
Pump Type: Submersible multi-impeller pump
-
Application: Clean water
-
Power: 0.75 HP
-
Voltage: 115V
-
Frequency: 60Hz
-
Phase: Single Phase
-
Maximum Flow Rate: Up to 120 L/min / 7.2 m³/h
-
Maximum Head: Up to 52 m / 170.6 ft
-
Maximum Operating Depth: Up to 10 m / 32.8 ft
-
Minimum Drainage Level: Approximately 35 mm
-
Maximum Liquid Temperature: 40°C / 104°F
-
Protection Rating: IP68
-
Motor: 2-pole motor
-
Pump Body: Technopolymer
-
Impellers: Noryl™
-
Diffusers: Noryl™
-
Shaft: AISI 431 stainless steel
-
Power Cable Length: 10 m / 32.8 ft
-
Included Features: Float switch, anti-vibration feet, hose connector, and sleeve with check valve
Ideal Applications
-
Water supply from tanks and reservoirs
-
Rainwater collection systems
-
Domestic water supply
-
Irrigation systems
-
Garden watering
-
Transferring clean water
-
Applications requiring increased water pressure
Important Information
This pump is designed for clean water free from abrasive particles and liquids that are not chemically aggressive to the pump’s components.
Please verify that your electrical supply is compatible with the pump’s 115V / 60Hz single-phase configuration before purchase.
Note: The 10 m measurement refers to the power cable length. The maximum operating depth is up to 10 m, while the maximum head is up to 52 m, depending on the operating point and pump curve.