PS&W 1.4HP/110V Submersible Shallow Well Automatic Booster Pump System Up to 60 PSI/1200 GPH with Smart Controller, Tankless System for Irrigation or Residential Use from Tanks or Cisterns

  • $159.99
    Unit price per 


Get Net 30 Credit Terms - 0% Interest. Apply Now Net 60 Credit Terms Icon


PS&W Submersible Pump Installation Instructions Equipment
You will find: A submersible shallow well pump, 1.4 HP/110V. SP1000 MultiB assembled with a float switch .
A Smart Control for the pump with pressure gauge included
Specifications: Pump: Submersible, 1.4 HP/110V
Max Pressure: 60 PSI Max Flow: 25 GPM 1’’ Inch Discharge 6” Diameter X 15”, weight 11 kg, Height Smart Control: Voltage: 110 Volts 1” Inlet and Outlet Male Connections Uses:
This system can be used to pump automatically from shallow wells, small tanks or big tanks, supplying water with pressure for different kind of applications such as garden sprinklers, irrigation, home water pressurization system and a multitude of other general purpose applications Hydraulic Installation:
The pump must be submerged in the shallow well or tank. The pump is equipped with a float switch that will turn off the pump if the water level is too low.
Install a one-inch pipe at discharge from the pump Installation: As a first step, you can extend the pipe horizontally from out of the well or tank the required distance.
The second step involves the installation of an elbow, then install the smart controller in upward position and a gate valve after the smart controller.
Once step one and two are completed, any water pressure application need will be satisfied. For example: Home or garden sprinklers, house water pressuring or evacuation of water from tanks or cisterns.
Electric Installation and Wiring: 1.It is very important to mention that wiring between the pump and the smart controller should be equal.
By this we mean wiring colors must be a match.
2.Please connect tightly the wires of the pump with the ones of the smart controller
3.110 Volt Power must be connected just to the smart controller Smart Controller Instructions: This controller can only be used in clean water Do not install any valve between the pump and the smart controller A gate valve can be installed after the smart controller
  • A submersible shallow well pump, 1.4 HP/110V. SP1000
  • MultiB assembled with a float switch
  • A Smart Control for the pump with pressure gauge and check valve incorporated included
  • Pump: Submersible, 1.4 HP/110V
  • Max Pressure: 60 PSI
  • Max Flow: 25 GPM
  • 1’’ Inch Discharge
  • 6” Diameter X 15” Height 11 kg weight
  • Voltage: 110 Volts
  • 1” Inlet and Outlet Male Connections

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)