Pedrollo PQm65 Peripheral Booster Water Pump 0.75HP 230V 60Hz NPT
The Pedrollo PQm65 is a compact peripheral booster water pump designed for clean-water applications where reliable pressure and efficient water transfer are required. Its peripheral impeller design provides high-pressure performance while maintaining a compact and practical construction.
Powered by a 0.75 HP single-phase motor, this electric water pump operates at 230V / 60Hz and is suitable for domestic water supply, pressure boosting, irrigation, tank filling, and other clean-water applications.
Key Technical Specifications
- Brand: Pedrollo
- Model: PQm65
- Pump Type: Peripheral booster water pump
- Power: 0.75 HP / 0.55 kW
- Voltage: 230V
- Frequency: 60Hz
- Phase: Single Phase
- Maximum Flow Rate: 40 L/min / 2.4 m³/h
- Maximum Head: 55 m / 180.4 ft
- Maximum Suction Head: 8 m / 26.2 ft
- Maximum Working Pressure: 6 bar / 87 psi
- Motor: 2-pole
- Protection Rating: IPX4
- Pump Body: Cast Iron
- Impeller: Brass
- Shaft: AISI 430F Stainless Steel
- Motor Bracket: Aluminum with Brass Cover
- Connections: 1" × 1"
- Thread: NPT
Ideal Applications
- Domestic water supply
- Water pressure boosting
- Filling tanks and reservoirs
- Garden irrigation
- Small irrigation systems
- Water transfer
- General clean-water applications
Important Information
The Pedrollo PQm65 is designed for pumping clean water free from abrasive particles and liquids that will not chemically damage the pump components.
Please verify that your electrical supply is compatible with the pump's 230V / 60Hz single-phase configuration and confirm that the 1" NPT suction and discharge connections are suitable for your installation.
Performance note: The maximum head of 55 m is reached at zero flow. Actual performance will vary depending on the required flow rate, piping, suction conditions, and installation setup.
Pedrollo PQm65 — compact peripheral design for dependable water pressure and transfer applications.