Eccotemp FVI12 Indoor 4.0 GPM Natural Gas Tankless Water Heater Vertical Bundle

$489.00
Unit price per

This bundle includes the FVI12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" horizontal vent kit.

The Eccotemp FVI12-NG Tankless Water Heater is a natural gas fired, indoor tankless water heater designed for small to medium hot water production where you need more than one hot water application at the same time. This model is perfect for vacation cabins, cottages, and smaller homes. The FVI12 offers a 45-degree Fahrenheit temperature rise when operating at 4 GPM maximum flow capacity and a 77-degree F temperature rise at 2.3 GPM. Included in the bundle is a horizontal stainless steel vent kit, ready to install. The Eccotemp FVI12-NG's 120 volt UL listed power cord powers the internal exhaust fan and digital display and only pulls about 2 watts idle and 1.07 Amps during operation, making it ideal when energy conservation is paramount.

Some additional Features:

Sleek modern design
Digital temperature display
True 1/2" NPT water fittings
Manual water temperature controls
Natural Gas Powered
4 GPM flow capacity
Power ventilation for safety, efficiency, and venting options
Tested-Safe Electronic ignition system
Fully independent gas and water controls
Precise temperature and water flow adjustment
Uses gas only when hot water is on
Requires standard household 120-volt electric outlet
UL listed electrical components
Energy factor: 79%
Hot water capacity range: 0.93 - 4.0 GPM
Maximum / Minimum gas rate: 25,000 to 74,500 BTUs

Eccotemp FVI-12 NG Dimensions:

Height 24.75"
Width 15.25"
Depth 6"
Weight approx. 33 lbs.
Shipping weight 34.7 lbs.

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp FVI12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Ventilation kit 3"

This 3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit. This vent kit is supplied with all the necessary components for a quick and seamless installation. It includes the following pieces:

(1) Termination Hood with backflow preventer
(1) 3" x 90 Degree Elbow
(1) 3" x 1' Pipe
(1) 3" Wall Thimble
(1) 3" Appliance Adapter

Made of AL-294C stainless steel. This is Category II/III and UL approved.

Please Note: The 3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit does NOT include the Eccotemp 2.5" to 3" Vent Adapter.

What’s Included:

Stainless steel vent kit
110 volt UL listed power cord
2.5”-3” Stainless steel adapter
3” Horizontal Vent Kit
2-year manufacturer warranty

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

Please Note: Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater.